Hi Group.
Has anybody done a rear engine mount on a pug 405? if so is it easy
todo. or do you have to remove the whole unit and hit the bush very
hard to remove it.and risk braking the unit.
On Sun, 4 Jun 2006 18:12:52 +0000, Chris
<chris@thingysrealm.myftp.org> wrote:
Quote:
Hi Group.
Has anybody done a rear engine mount on a pug 405? if so is it easy
todo. or do you have to remove the whole unit and hit the bush very
hard to remove it.and risk braking the unit.
thanks for any replys.
Do not even attempt to hit it out. If you don't break the unit, you
will probably bend it. It is only ally. It must be pressed out and in.
If you don't have access to a press and a close fitting drift to use
to press it out, then get the whole unit which comes with the bush
already fitted.
Also the bush has to be fitted a certain way or you'll get vibration
from the engine.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
![[backend]](images/powered/feed_20_news.png "backend"){kind=small}
![[backendforums]](images/powered/feed_20_forums.png "backendforums"){kind=small}
![[backenddownloads]](images/powered/feed_20_down.png "backenddownloads"){kind=small}
![[backendlinks]](images/powered/feed_20_links.png "backendlinks"){kind=small}
![[Validate robots.txt]](images/powered/valid-robots.png "Validate robots.txt"){kind=small}
Your Privacy Choices